This is by no means the best one out there, but I figured I'd give it a shot. Step 1: Place a Space synthesizer in the work area. Turn the Brightness knob down (but not all the way - I typically leave it around -40%) Step 2: Increase the attack and release knobs to around 200 - 300 ms each. Step 3: Connect a Chorus to the Space. Adjust the Depth knob to your liking. I usually have it around 70 - 80%. Step 4: Connect a Quasar to the end of the chain. You can leave the default settings if you like, but if you chose to leave the brightness on the higher side, turn down the Low-Pass frequency knob down. Adjust the decay time to your liking. Step 5: This step is mostly optional. Connect a Curve to the end of the chain. Reduce the low-mid frequencies (around 200 - 500 Hz) and, if desired, cut out all low end. Mix/master how you like. Hope this helps someone.